52 Week UFO Challenge - Project #19 - Nautical Baby Quilt

Back before Christmas a co-worker commissioned me to make a baby quilt for her best friend, She knew that the nursery was going to be decorated with a nautical theme, so she asked if I could make the quilt to match. I looked EVERYWHERE for jeuvenile nautical fabric and found nothing!! Finally I found a white/navy/red/medium blue striped fabric that I thought would work (if only for the backing). It couldn't decide what to do with it until one day I was looking on Pinterest and saw a sailboat block - I figured out how the block was assembled and then got to work cutting!!

I found some co-ordinating fabrics in my stash and then used my Accuquilt Studio Cutter and the 3" Half Square Triangle Die to cut them into triangles for the sails on the boats.

For each boat block I sewed four coloured triangles to four white triangles as shown.

I cut 3 1/2" x 6 1/2" strips of the white fabric and sewed one to each side of the sail sections.

Used my Frixion pen to mark a line on the back of two white 3 1/2" squares and then aligned these onto one 3 1/2" x 12 1/2" rectangle of the striped fabric, right sides together.

I then sewed along the drawn line and then cut off the excess fabric. 

I then pressed the unit and sewed it to the bottom of the sail section and then sewed a 3 1/2" x 12 1/2" rectangle to the bottom of the block to create the water.

I sewed these four sailboat blocks together in a row and then added stripes of the other fabrics in varying widths.

My friend, the new mom and baby Colton all loved the quilt and so did I. Project #18 checked off my list!! Here is Colton and his new quilt. What a little cutie!!

Block of the Month - April Block

New Beginnings Block of the Month

This is no April Fool's joke - I've just added the April block to Craftsy and it is ready for digital download!!

Here is my fabric selection for this block. As you can see, I chose to use a light turquoise for the centre of the block instead of the off-white in the pattern. 

Once again, my little cardboard tags came in handy when I started cutting my shapes - it made it so much easier to keep track of what to sew to what!

Here is my finished block. I just love this one!!

April Block of the Month

There are now five blocks available in our Craftsy store. Be sure to check out our store and to download the FREE bonus block and the FREE General directions to see what our Block of the Month is all about.

At the end of the year, we will be offering two different pattern for finishing the blocks into a bed quilt.

Make sure to share pictures of YOUR finished blocks on Craftsy - for every block you add we will enter your name into our draw for a FREE quilt kit of one of our Northcott patterns!!

52 Week UFO Challenge - Projects #17 and #18 - Modern Wool Pillow and Tea Cozy

I've had these two wool pieces, unfinished, in my studio for so long that when I dug them out I couldn't remember what I was planning to do with them. I knew the one was supposed to be a tea cozy when finished, but the square piece could have been anything. I was obviously having fun with my Accuquilt Studio cutter and circle die one day, but for some reason I never even started to stitch these pieces.

I decided that the square piece would make an awesome pillow as it was about 16" square, so I got to blanket stitching all of the circles using my Razzle and Dazzle threads from WonderFil.

Blanketstitching done with Razzle and Dazzle threads

After the circles were all sewn, I used a blanket stitch all of the way around to secure the back of the pillow and then left a small opening to stuff with PolyFil.

Hole left for stuffing

 Here is the finished pillow! Wouldn't it be fun in a teenagers room?

The tea cozy was a bit more complicated to finish. Fist I blanket stitched all of the circles to the background.

 Next, I cut two pieces of batting about a 1/2" smaller (all around) than the wool background.

  I then used my 505 Spray to stick them to the back side of the fabric I wanted to use for my lining. Check out the hot pink!!

I used my walking foot to machine quilt a grid of lines through the batting and lining.

 I then sewed the two pieces of quilted lining right sides together along the curved edge, leaving a small unsewn section for turning.

I placed the wool front and back together with right sides facing the sewed along the curved edge.

I turned the outside of the placemat right side out then placed it inside of the lining (with right sides together) and pinned them together. The next step was to sew the lining and the outside together with a 1/2" seam.

Then I had to pull the whole thing right side out through the hole in the lining, I stitched that hole closed and then top stitches around the opening of the tea cozy.

Here it is - all finished!!

These two items are available for purchase in my Fairfield Road Designs Etsy store. Check out these items and more at this link.

Great Tips for Tidying up Leftover Binding Strips

If you are like me, you just can't make yourself throw away extra binding that you may have from a project. And, if you are like me, then you keep all of these binding ends in a safe place, ready to be used in a future project. And, if you are like me, you FORGET to use any of the bindings in this safe place and they become a huge untamed mess. Well, NOT ANYMORE!!! Today I'm taming the binding beast!!

In my sewing room I have six little plastic boxes. One for leftover strips of fabric, one for 2" squares of fabric, one for 3" squares of fabric, one for 4 1/2" squares of fabric, one for flannel squares and one for extra pieces of binding. Whenever I am cutting out a project and I have a little left over fabric, I cut it into squares and put them in the appropriate bin. I've used these squares to make tote bags or other small scrappy projects. Since I've started my 52 week UFO Challenge I've made A LOT of binding and had lots of ends left over, but my binding bin was so full that I couldn't put anything else in.

The first thing I did was to THROW OUT any pieces that I knew I would never use. When I first started quilting I cut all of my binding 2" wide, but now I always use 2 1/2" strips, so I tossed all of the 2" wide ones into my scrap bin (which is also starting to overflow!).

The next step was to sort. I decided to make one pile of red bindings...

One pile of batik bindings...

One pile of country coloured bindings...

And one pile of navy bindings, one of brights and one that was all black fabrics. I randomly sewed the bindings in each pile end to end with a mitred join, pressed them and then wound them onto some pieces of cardboard to keep them tidy. Here is my collection of brights all ready for a fun kids quilt!!

Bright bindings wound on cardboard.

 I LOVE the way the red ones look! I can't wait to use them in one of my projects!

I could fit about four different bindings on each piece of cardboard. A pin the end of each binding will keep them from unravelling.

Here is my bin, all nice and organized!! I had a few pieces that just didn't fit in with any of my groupings so I left them on their own. Now that I know what I have in the box I'll be more apt to use them. And, now that the bindings are all sorted nicely, I can add new pieces to whatever grouping I want as I add them to the box. I LOVE it!!!

52 Week UFO Challenge - Project #16 - Passion Planner Covers

A couple years ago I exhibited in an artists studio tour and had some quilted mini agenda covers for sale. I had these two pieces leftover and  decided to make some quilted Passion Planner covers.

Oriental pieced section

Country colours pieced section

My first step was to load the pieced units on my Gammill and quilt them. I also mounted a section of my Northcott "Ambiance" fabric as well. For the Ambiance, I decided to quilt spirals, and for the other two, I chose my leaves and swirls.

Spirals on the Ambiance fabric

Leaves and Swirls quilting design

 The next step was to trim the quilting pieces into rectangles  12 1/4" x 19". I was able to cut two rectangles from each of my quilted pieces to make a total of six Passion Planner covers.

Quilted rectangle.

 The next step was to cut rectangles of fabric to make the inside flaps of the covers. Each inside flap is cut 9" x 12 1/4" and then folded in half to make a rectangle 12 1/4" x 4 1/2". I then pressed each of these rectangles and then pinned two of them to the inside of each each of the planner covers, aligning the raw edges.

One flap pinned to the inside front of the planner.

 The last step was to sew binding to the outside edges of each of the planners and then to slip the Passion Planner inside! The two flaps on each end of the cover hold it in place and provide two pockets to keep important papers.

The first finished planner cover,

The inside of planner cover #2

I've added these planner covers to my Fairfield Road Designs Etsy store - check them out here. UFO project #16 is done!